Caple C981G Manual de Instruções

GBInstruction manual for gas hobsContact Caple on 0844 800 3830 or for spare parts www.4caple.co.ukModel code: C981GModel code: C1081G

10INSTRUCTIONS FOR THE INSTALLERMinimum flow adjustment (4-burner version)The minimum flow is correctly adjusted when the flame remains lit

11INSTRUCTIONS FOR THE INSTALLERMAINTENANCEReplacing the power supply cableShould it be necessary to replace the power supply cable, use a sta

12INSTRUCTIONS FOR THE USERGENERAL PRECAUTIONSUsing the burnersTo obtain the maximum efficiency without wasting gas, the pot diameter must

13INSTRUCTIONS FOR THE USERAll operations concerning installation, adjustment and adaptation to the available gas type must be carried out by

14INSTRUCTIONS FOR THE USERTurning off all burnersTo turn off all burners simultaneously, briefly press the ON/OFF button: the appliance

15INSTRUCTIONS FOR THE USERTouch panel unlock5 5 5 5 5To unlock the touch panel, press the “key” button and the “+” button of the LH b

16INSTRUCTIONS FOR THE USERUSING THE APPLIANCE - 4-BURNER VERSIONThe symbols printed above each burner control show the correspondence betwe

17INSTRUCTIONS FOR THE USERTurning off all burnersTo turn off all burners simultaneously, briefly press the ON/OFF button: the appliance

18INSTRUCTIONS FOR THE USERTouch panel unlock5 5 5 5To unlock the touch panel, press the “key” button and the “+” button of the LH bur

19INSTRUCTIONS FOR THE USERElectronic self-diagnosisThe circuit boards perform continuous self-diagnosis. In the event of hardware faults

2Dear Customer,Thank you for choosing a Boretti product and congratulations on your purchase.We are confident that your new appliance, manufactured wi

20The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due to misprints or clerical errors. It

3MODEL: C981G242311 Rapid burner 3000 W2 Semi-rapid burner 1650 W3 Auxiliary burner 1000 W4 Triple crown burner 4000 WMODEL: C1081G 42131

4INSTRUCTIONS FOR THE INSTALLERINSTALLATIONInstalling the hobThe appliance is designed to be built-in to a heat-resistant kitchen unit.Kitchen unit

5INSTRUCTIONS FOR THE INSTALLERTo install the hob, proceed as follows: - Remove the pan supports and burners from the hob. - Turn the appliance upside

6INSTRUCTIONS FOR THE INSTALLERElectrical ConnectionThe appliance must be connected to the electrical mains by qualified personnel and in conformity w

7INSTRUCTIONS FOR THE INSTALLERChoosing the type of gas (5-burner version)The hob can be configured for use with natural gas or LPG. To activate the g

8INSTRUCTIONS FOR THE INSTALLERMinimum flow adjustment (5-burner version)The minimum flow is correctly adjusted when the flame remains lit

9Choosing the type of gas (4-burner version)The hob can be configured for use with natural gas or LPG. To activate the gas selection procedure the hob