Caple C871i Manual do Utilizador Página 32

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 572
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 31
Apple II Computer Info
#############################################################################
### FILE : apple2pc.joystck
#############################################################################
### Created : Wednesday, February 5, 1997 Modified: Wednesday, February 5, 1997
### File Type: "TEXT" File Creator: "LMAN"
### File Size: 5574 bytes 5 KB
#############################################################################
Path: news1.icaen!news.uiowa.edu!chi-
news.cic.net!mr.net!newsfeeds.sol.net!news.maxwell.syr.edu!cpk-news-
hub1.bbnplanet.com!news.bbnplanet.com!cam-news-
hub1.bbnplanet.com!howland.erols.net!newsxfer3.itd.umich.edu!portc01.blue.aol.com!
audrey01.news.aol.com!not-for-mail
Newsgroups: comp.sys.apple2
Subject: Re: Apple Joystick adapter for IBM port available? How to make?
Date: 5 Feb 1997 18:22:46 GMT
Organization: AOL http://www.aol.com
Lines: 222
Message-ID: <[email protected]>
References: <[email protected]>
NNTP-Posting-Host: ladder01.news.aol.com
X-Newsreader: AOL Offline Reader
In article <[email protected]>, [email protected] (Greg) writes:
>
>I have an apple //c joystick and was wondering if anyone out there has
>made a cable/adapter to use it with an IBM joystick port.
>
>
Here is a Step-by-Step followup to the earlier info on doing the
Apple2-to-PC joystick conversion ...
Apple2-to-PC Joystick Conversion: Part 2
Step-by-Step (2/5/97 version)
to A2-WUG,1wsw, GS.WorldView
DOING THE CONVERSION
To convert an Apple2 joystick for PC use
you will need a cable from an old PC
stick (or a 6-wire cable and 15-pin
female connector). You can find junk
PC sticks with good cables at flea
markets and lots of other places.
You will also need two 330k resistors.
1. First, open the Apple joystick
case and mark each wire going to
the cable. The best way is to use
small self-stick labels. Label each
wire by function (e.g. "+5", "X",
"GND", etc.).
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 32 of 572
Vista de página 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 571 572

Comentários a estes Manuais

Sem comentários