Caple C871i Manual do Utilizador descarregar pdf (Página 506)

Apple II Computer Info

#############################################################################

### FILE : titaniie

#############################################################################

### Created : Sunday, January 14, 1996 Modified: Sunday, January 14, 1996

### File Type: "TEXT" File Creator: "LMAN"

### File Size: 7664 bytes 7 KB

#############################################################################

Path: news.uiowa.edu!chi-news.cic.net!newsxfer.itd.umich.edu!bloom-

beacon.mit.edu!senator-bedfellow.mit.edu!pbauer

From: [email protected] (Paul H Bauer)

Newsgroups: comp.sys.apple2

Subject: Re: accelerator's slot?

Date: 8 Oct 1995 00:24:39 GMT

Organization: Massachusetts Institute of Technology

Lines: 149

Message-ID: <[email protected]>

References: <[email protected]>

NNTP-Posting-Host: arcadia.mit.edu

TITAN ACCELERATOR IIe

Section 1

STEP 1. DON'T TAKE THE ACCELERATOR IIE OUT OF THE PINK ANTI-STATIC BAG

YET.

STEP 2. Turn off the power to your Apple.

STEP 3. Put a piece of aluminum foil on the table next to your Apple.

STEP 4. Take the cover off the Apple.

STEP 5. Make a list of the contents of each slot in a table like the one

below:

Slot 0 ____________________ Slot 4 ______________________

(or aux slot)

Slot 1 ____________________ Slot 5 ______________________

Slot 2 ____________________ Slot 6 ______________________

Slot 3 ____________________ Slot 7 ______________________

STEP 6. If you have an Apple II or II Plus,we reccomend that you put your

Accelerator IIe in slot 0. If you have a memory board in slot 0

now move it to another slot or just take it out. The Accelerator

IIe contains its own built-in language card with 16k of memory, so

you don't really need another 16k memory board.

STEP 7. On your slot table, mark the slot number(s) that contain DISK

CONTROLLER CARD(S), MODEM INTERFACE, VIDEO DIGITIZER CARD, or

other interfaces to time-sensitive devices. A time-sensitive

device is one whose controlling software makes iterative timing

calculations. This does not include memory boards, 80 column

cards, or printer interfaces.

STEP 8. Touch the Apple's power supply to discharge any static electricity

on your fingers. Then remove the Accelerator IIe from its pink bag

and put the board on the aluminum foil. Make sure each pin is

touching the aluminum foil to prevent static buildup.

STEP 9. Find the block of small switches on your Accelerator IIe board.

Switches 1 to 7 correspond to slots 1 to 7. For each slot with a

time sensitive device (refer to your slot table), set the

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 506 of 572

1 2 ... 501 502 503 504 505 506 507 508 509 510 511 ... 571 572

Caple C871i Manual do Utilizador Página 506

Comentários a estes Manuais

Caple C871i Manual do Utilizador Página 506

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Caple C871i