Caple C871i Manual do Utilizador descarregar pdf (Página 466)

100

101

Apple II Computer Info

#############################################################################

### FILE : ssc.dips

#############################################################################

### Created : Sunday, January 14, 1996 Modified: Sunday, January 14, 1996

### File Type: "TEXT" File Creator: "LMAN"

### File Size: 6670 bytes 6 KB

#############################################################################

Newsgroups: comp.sys.apple2.programmer

Path: news.uiowa.edu!chi-

news.cic.net!news.gryffin.com!news.ece.uc.edu!babbage.ece.uc.edu!news.kei.com!news

.mathworks.com!tank.news.pipex.net!pipex!news.sprintlink.net!in2.uu.net!news1.digi

tal.com!decwrl!waikato!comp.vuw.ac.nz!actrix.gen.nz!dempson

From: [email protected] (David Empson)

Subject: Re: Apple Super Serial Cards

Message-ID: <[email protected]>

Sender: [email protected] (News Administrator)

Organization: Actrix - Internet Services

Date: Sun, 1 Oct 1995 12:33:48 GMT

References: <[email protected]>

X-Nntp-Posting-Host: atlantis.actrix.gen.nz

Lines: 203

In article <[email protected]>, 2230 <brockman> wrote:

> I have 2 apple IIe's that I'm trying to get to communicate with each other...

> And I need doc's on the card, or some info...

> Specificaly, What should I set the dips to... Modem or Terminal, and

> finnally.. what about the Software....

Below is an extract from a mail message I sent to someone a while ago

which should contain enough information to get you started.

To connect two super serial cards together for communications, your

best option is to set both of them for a MODEM connection in

Communications mode, and use a null-modem cable wired as follows:

2 -------------------------- 3

3 -------------------------- 2

4,5 -------------------------- 8

8 -------------------------- 4,5

7 -------------------------- 7

6 -------------------------- 20

20 -------------------------- 6

Note that the cable is symmetrical.

You can probably get away with a few less flow control signals, but

this will guarantee that everything works properly.

If you only have a straight through ribbon cable available, change one

of the jumper blocks to the TERMINAL position, which reverses all of

the data and flow control pins (see below for details).

Software: any IIe-based communications software should do the trick.

There are some freeware and shareware programs around, e.g. Z-Link

(shareware) and Kermit (freeware).

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 466 of 572

1 2 ... 461 462 463 464 465 466 467 468 469 470 471 ... 571 572

Caple C871i Manual do Utilizador Página 466

Comentários a estes Manuais

Caple C871i Manual do Utilizador Página 466

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Caple C871i