Caple C871i Manual do Utilizador descarregar pdf (Página 35)

100

101

Apple II Computer Info

B1, X, and Y. The same six leads are

labeled on the PC cable. Splice each

Apple2 wire to the corresponding PC

cable wire. Use heat-shrinkable tubing

to cover each connection.

Seat the new cable in the joystick case,

arrange leads to avoid mounting posts,

etc., and close up the case. Viola!

CHECKS

If you have an Ohm meter here are some

checks you can do:

X (Horizontal) Check- check R between

cable pins 1 and 3. As you move stick

left to right R should go from 0 to about

100k.

Y (Vertical) Check- check R between

cable pins 1 and 6. As you move stick

up to down R should go from 0 to about

100k.

Button 0 Check- (Button 0 is the main,

"Fire" button.) cable pins 2 and 4 or 5.

It should be very high and go to 0 when

Button 0 is pressed.

Button 1 Check- check R between

cable pins 7 and 4 or 5. It should be

very high and go to 0 when Button 1

is pressed.

TRYOUT

Plug in the stick and try it with a

game.

Some games (such as Elite Plus)

will claim no joystick is

present if the stick is badly out

of adjustment. If this happens, try

the stick on a game which is less

picky and includes pre-play stick

adjustment.

Once adjusted, your 'new' stick should

work fine with all PC wares.

R/\/\/

Rubywand

###################################################### E N D O F F I L E

### apple2pc.joystck

###################################################### E N D O F F I L E

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 35 of 572

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 571 572

Caple C871i Manual do Utilizador Página 35

Comentários a estes Manuais

Caple C871i Manual do Utilizador Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Caple C871i