Caple C871i Manual do Utilizador descarregar pdf (Página 511)

100

101

Apple II Computer Info

which uses the info supplied by Wayne Stewart and adds a few extra details:

What are the connections for a CGA video cable to the

molex connector on the TrackStar E?

The cable has an 8-pin female molex connector going to a 9-pin

Dsub9 male plug.

-key- 1 2 3 4 5

]oooooooo[ ' ' ' ' '

87654321 ' ' ' '

6 7 8 9

(connectors viewed from front)

Molex Dsub9

on TS to PC CGA video output

1* - - - - - 1 Ground

2 - - - - - - 7 Reserved

3 - - - - - - 3 Red

4 - - - - - - 4 Green

5 - - - - - - 5 Blue

6 - - - - - - 6 Intensity

7 - - - - - - 8 Horizontal Drive

8 - - - - - - 9 Vertical Drive

*Pin 1 is usually marked "1" on circuit board.

Pin2 of the Dsub9 has no connection. There's also a ground wire that

goes to the outside of the Dsub9 plug.

Pins on board viewed looking at the front (chip side) of the board:

_______________________________________

--- keyway --- |

. . . . . . . . |

1 2 3 4 5 6 7 8 |

Wayne Stewart

11 March 2001

> ok a 3rd question:

> the circuit board and ribbion wire thing you plug into the Floppy Controller

> of the PC, then into a 360k floppy and a output connector on the lower left of

> the Trackstar: Anyone know a source for these or again, pin outs and how the

> board works??

....

I do not have info on the pinouts. The Trackstar E manual has a few pictures

showing setups using a big ribbon cable and small adaptor board which originally

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 511 of 572

1 2 ... 506 507 508 509 510 511 512 513 514 515 516 ... 571 572

Caple C871i Manual do Utilizador Página 511

Comentários a estes Manuais

Caple C871i Manual do Utilizador Página 511

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Caple C871i